Hearthstone Wild Decks

List of contents of this article:

• 1,Hearthstone Wild Decks linux installation tutorial
• 2, steps to install Linux system on u disk
• 3, Linux system installation tutorial?

linux installation tutorial

Start the dell server and press F11 to select BootManager.Select one-shotUEFIbootmenu, one-time UEFI boot menu. Select DiskconnectedtofrontUSB and start from the USB flash drive. The Linux installation interface appears and enters the Linux system installation steps. Error i8042: nocontrollerfound may be reported.

The installation steps are as follows: prepare a USB flash drive with a capacity of more than 8GB and make sure that the data in it has been backed up. Download the installation mirror file of the required Linux distribution. Download a tool for creating a bootable USB flash drive. Use the selected tool to write the Linux installation mirror image to the USB flash drive.

The steps to install Linux are as follows: Prepare a bootable Linux installation media, which can be a CD-ROM, USB flash drive or network startup.Start the Linux installation media on your computer and enter the installation interface. Select the basic settings such as language, time zone, keyboard layout, etc.

The next step is to write the mirror image on the USB flash drive and plug your USB flash drive into the existing Linux system. VMWare can also recognize it. The command is very simple zcat boot.img.gz; /dev/sda or sdb.

WinPE can install the Linux system through the USB flash drive. Let's take WinPE on the USB flash drive to install Centos3 version of Linux as an example. The method is as follows: install WinPE on the USB flash drive and establish a directory called LMT in the root directory of the USB flash drive. CentOS-4-x86_64-minimal.The iso image is copied to the LMT directory under the USB flash drive.

Steps for installing Linux system on u disk

Next The step is to write the mirror image on the USB flash drive and plug your USB flash drive into the existing Linux system. VMWare can also recognize it. The command is very simple zcat boot.Img.gz; /dev/sda or sdb.

Steps: Download Universal USB Installer software and the Linux system you need, such as CentOS, Ubuntu, etc. Steps Double-click to open the Universal-USB-Installer tool you just downloaded and start the installation. As shown in the figure below: Steps Click Accept the agreement to start the installation.

Install WinPE on the USB flash drive and set up a directory called LMT in the root directory of the USB flash drive. Copy the CentOS-4-x86_64-minimal.iso image to the LMT directory under the USB flash drive. Insert the USB flash drive into the computer. Restart the computer, enter the BIOS and select the USB flash drive to start.

A computer (need to support booting from a USB flash drive); a USB flash drive (capacity not less than 4GB); a Linux distribution available for installation (such as Ubuntu, CentOS, etc.).

Linux system installation tutorial?

1. Install the win7 system first. Generally, the USB disk of the winpe system is often used to start, and ghost is restored and installed. The installation process will not be described in detail. It should be noted to reserve enough disk space for the installation of linux. Find the mirror image of Linux, run the load, load the linux installation disk, and install it.

2. First of all, you need to download an installation mirror image of the Ubuntu desktop version. Be sure to choose the 64-bit desktop version, although the mirror image is not provided for Mac.The mirror image can be started in BIOS and EFI modes, while the Mac image can only be started in BIOS. Mac is specially designed like this, but we need to make it start in EFI mode.

3. Detailed steps to install Linux on the USB flash drive. After restarting, it will automatically start from the USB flash drive, and then the installation options of the Linux system will be displayed. Move the mouse to the first Install CentOS 7, and then press enter. Press Return again to start the installation. In the first step, the default language is English. Click continue to continue to the next step.

4. Step 1: Prepare an installation disk or boot disk. To install the Linux system, you must first prepare an installation disk or boot disk. Generally speaking, it is recommended to use a USB boot disk.You can download the installation file to make the boot disk from the official website of Linux, or you can buy the made boot disk.